home *** CD-ROM | disk | FTP | other *** search
/ Cream of the Crop 1 / Cream of the Crop 1.iso / PRINTER / LASLT35A.ARJ / README.DOC < prev    next >
Text File  |  1992-07-25  |  10KB  |  179 lines

  1.  
  2. ================================================================================
  3. - README.DOC - THIS FILE IS FOR INSTALLATION INSTRUCTIONS AND NEW INFORMATION -
  4. *YOU NEED 510K OF FREE MEMORY & A HARD DISK WITH 960K FREE DISK SPACE FOR LLHP* 
  5. To Print Readme.DOC on Your Laser Printer, Type PRINT README.DOC + <ENTER> key.
  6. --------------------------------------------------------------------------------
  7.  
  8. Note:  For the vision impaired, a large font screen driver is available with the 
  9. Commercial Edition. There is no additional charge for this screen driver.
  10.  
  11.  Thank you for trying the Shareware Edition of Laser Letterhead Plus. If you
  12. wish to register this product, you will receive three free customized PCX images
  13. for a letterhead, logo, and watermark along with additional utility programs,
  14. including a Spell Check for TextWriter. See the registration form below. The 
  15. install program is an easy one that sets up the program so it may be used 
  16. immediately. Price of the Registered Commercial Edition: $25 plus shipping. 
  17.  
  18. The Handbook is set for 60 lines/page and may be printed on your laser printer.
  19. If you have PRINT.EXE in the DOS directory, type PRINT README.DOC at the system
  20. prompt while in the same directory as HANDBOOK.DOC. Or, you may also use 
  21. TYPE HANDBOOK.DOC > LPT1 on the command line if LPT1 is your printer port.   
  22.  
  23. The Handbook may be viewed on screen from inside Laser Letterhead plus by press-
  24. ing Function Key F1. Otherwise, it may be read on screen when you are in the 
  25. program directory by typing BROWSE HANDBOOK.DOC and striking ENTER at the system
  26. prompt. In the same manner, this README.DOC file may be read also by typing 
  27. BROWSE README.DOC at the system prompt or from the DOS Shell inside LLHP.
  28.  
  29. --------------------------------------------------------------------------------
  30.                   THIS PROGRAM REQUIRES PCL BITMAP SOFTFONTS
  31. --------------------------------------------------------------------------------
  32.  
  33. Laser Letterhead plus requires that you supply your own PCL bitmap soft fonts.
  34. The fonts in SetUp are only examples and do not exist on the program disk. PCL
  35. bitmap soft fonts are readily available from your shareware dealer and other
  36. commercial sources. Postscript fonts, outline fonts, or programs that are 
  37. made to create fonts on the fly for specific applications will not work. If you
  38. cannot locate PCL bitmap soft fonts, you may call or FAX our Technical Support
  39. Voice/FAX/Message line: 813-544-0212 for help.
  40.  
  41. --------------------------------------------------------------------------------
  42.                   CAUTION NOTICES IF YOU ARE USING A CACHE
  43. --------------------------------------------------------------------------------
  44.  
  45. CAUTION: THIS PROGRAM UTILIZES EXTENDED AND/OR EXPANDED MEMORY IF AVAILABLE. IF
  46. YOU HAVE A DISK CACHE THAT RUNS IN EXTENDED MEMORY, SHUT OFF THIS PROGRAM'S 
  47. ABILITY TO ACCESS EXTENDED MEMORY IN SETUP. THE PROGRAM WILL ACT STRANGELY AND 
  48. HANG UP IF YOU DO NOT DO SO. THIS DOES NOT APPLY TO WINDOWS 3.1 USERS (BELOW).
  49.  
  50. WINDOWS 3.0 USERS: IF YOU HAVE HIMEM.SYS AND USE SMARTDRIV.SYS, USE THE /a 
  51. SWITCH AFTER IT SO IT WILL ACCESS AND USE EXPANDED MEMORY. EXPANDED MEMORY DISK
  52. CACHES DO NOT INTERFERE WITH LASER LETTERHEAD PLUS OR WITH MOST OTHER PROGRAMS.
  53.  
  54. WINDOWS 3.1 USERS: IF YOU USE SMARTDRIV.EXE THAT IS INSTALLED IN AUTOEXEC.BAT
  55. FILE, LASER LETTERHEAD PLUS VERSION 3.5 IS COMPATIBLE AND WILL WORK WITH IT
  56. WITHOUT REGARD AS TO HOW YOU HAVE IT SET UP. YOU MAY ALSO SET LLHP TO USE
  57. BOTH EXTENDED AND EXPANDED MEMORY IN THE SETUP PROGRAM.
  58.  
  59.  
  60. ~
  61. -------------------------------------------------------------------------------
  62. |||||||||||||| EASY INSTALLATION INSTRUCTIONS - HARD DISK ONLY ||||||||||||||||
  63. -------------------------------------------------------------------------------
  64.  
  65. The INSTALL program will create a directory  and copy all the program files into
  66. it. If you keep your soft fonts in another directory on your disk, INSTALL will 
  67. alter the LP.BAT file to indicate that to the program at start up and download
  68. time. This program is available on two 360K disks or one 720K disk.    
  69.  
  70. -> 1. Place the Program diskette in Drives A or B or whatever floppy diskette 
  71. drive you have. It does not HAVE to be drive A. If you are using two 360K 
  72. diskettes (both are required), insert Program Disk #1. 
  73.  
  74. -> 2. Log onto the drive containing the program diskette and type: INSTALL
  75.  
  76. -> 3. The INSTALL program will ask on what drive you wish to locate the program 
  77. (it must be on your hard disk). It will create a new directory for the files.
  78. You are asked to supply the name of the directory.
  79.  
  80. -> 4. You will see on the screen what is occuring. If you have 360K diskettes, 
  81. you will be prompted to insert Program Disk #2. The 720K diskette will skip the
  82. prompt.
  83.  
  84. -> 5. You will be asked if you want to keep the soft fonts in the same directory 
  85. as the program files, or if they are already in another drive and/or directory.
  86. Avoid placing your fonts in a subdirectory off of a directory of another program.
  87. This takes much longer for the program to find the fonts, and may cause a 
  88. problem. If you wish to have several programs access your soft fonts, place 
  89. them in a directory directly off the root directory.
  90.  
  91. -> 6. When the INSTALL process stops, you will be on the drive you specified 
  92. above for the Program files.  Installation is completed. 
  93.  
  94. -> 7. Run a DIR command on the program directory. You must have a total of 35
  95. files installed for Laser Letterhead plus to work properly. If you do not, 
  96. contact your shareware distributor or CPI Software. The following is a list of
  97. files that you should have; all but this README.DOC are needed for LLHP to work:
  98.  
  99.   1. LP.BAT         2. BROWSE.COM     3. OVL_1.EXE      4. OVL_2.COM   
  100.  
  101.   5. OVL_3.COM      6. OVL_4.COM      7. OVL_5.COM      8. OVL_6.EXE   
  102.  
  103.   9. ADDRESS.DAT   10. COUNTER.DAT   11. COUNTEXT.DAT  12. IMPORT.DAT
  104.  
  105.  13. LETTER.DAT    14. PHRASE.DAT    15. TEXT.DAT      16. HANDBOOK.DOC
  106.  
  107.  17. README.DOC    18. ENVELOPE.EXE  19. LLHPV35.EXE   20. TWRITE.EXE
  108.    
  109.  21. WORDPROC.EXE  22. BIGJOHN.PCX   23. FROMDESK.PCX  24. JOHNFLY.PCX 
  110.  
  111.  25. MEMO.PCX      26. SAVEDOLP.PCX  27. SAVEFISH.PCX  28. SHUTLOGO.PCX 
  112.  
  113.  29. TECHLINE.PCX  30. TOP.PCX       31. WM_AERO.PCX   32. WM_DOLPH.PCX 
  114.  
  115.  33. WM_ENVIR.PCX  34. WM_HORSE.PCX  35. WORLDINC.PCX
  116.  
  117. -> 8. Type LP to start the program, and go to the Handbook, and follow the
  118. instructions under "How to Begin".  Thank You for trying Laser Letterhead Plus.
  119. Don Gerlach, CPI Software, PO Box 47097, St Petersburg, FL 33743 - 813-544-0212 
  120. ~
  121. ===============================================================================
  122.           Product Registration and Request for Basic Customized PCX Pak
  123. ===============================================================================
  124.  
  125.     Registration will entitle you to receive the Commercial Edition of Laser 
  126.     Letterhead plus, a printed Handbook, and the Basic Customizing PCX Pak. The
  127.     PCX Pak contains forms for obtaining one PCX text based logo, one PCX 
  128.     letterhead image, and one PCX watermark image at NO COST TO YOU. The image 
  129.     designs selected from the Pak are professionally designed as vector images
  130.     using fountain fills, gray shades, 3-D perspective or other appropriate 
  131.     effects. Finally, they are scaled to exact print size and converted to a
  132.     black and white PCX image. Typefaces may be selected from a wide selection
  133.     (over 100) of popular fonts. You may include material for scanning.
  134.     
  135.     In addition, you may have one image of your own converted to PCX format 
  136.     and/or re-scaled if it is in one of the following formats: 
  137.  
  138.     1. TIFF files                           7. PIF, GDF from IBM 
  139.     2. BMP or Windows 3.+ Bitmaps           8. PICT from MacIntosh computers
  140.     3. DXF or Autocad                       9. HPGL plotter files
  141.     4. AI, EPS, from Adobe                 10. CGM Computer Graphics Metafiles 
  142.     5. GEM files                           11. EPS CorelTrace
  143.     6. PIC from Lotus                      12. CDR Corel Draw!
  144.     If your image is not in any of these formats, we will be able to scan it 
  145.     with a high resolution 600dpi flatbed scanner, converting it to a PCX file.
  146.     Scanned images run the risk of losing some small detail when transferred.
  147.           
  148.    
  149.     Additional PCX images or logos may be ordered with the Basic PCX Pak.
  150.     We reserve the right to refuse any image or letterhead requests that are 
  151.     considered unreasonable or not within the scope or intent of this offer.
  152.  
  153.     --------------------------------------------------------------VER 35080192
  154.  
  155.  
  156.     Name:________________________________________Telephone:(_____)____________ 
  157.  
  158.     Business Name:____________________________________________________________
  159.  
  160.     Street Address:___________________________________________________________
  161.  
  162.     City, State, Zip:_________________________________________________________
  163.  
  164.     Disk Size: __1.2M HD 5.25" __1.4M HD 3.5"      Amount of Laser Ram:_______
  165.            
  166.     Check if User is Vision Impaired & Requires Large Screen Font Driver:_____ 
  167.  
  168.     Registration Fee: Each Single User...............: ___@ $25.00....:_______
  169.               
  170.     Florida Residents Add 6% State Sales Tax (Pinellas County 7%).....:_______
  171.  
  172.     Shipping/Handling for US or Canada add $4.95 (Others add 8.95)....:_______
  173.  
  174.     Total.............................................................:_______
  175.        
  176.   Make Checks/Money Orders Payable to CPI Software and Send with this form to: 
  177.     PO Box 47097, St. Petersburg, Florida 33743-7097 USA - FAX 813 544-0212
  178.     All Currency in US dollars Drawn on a Bank or Branch Located in the USA
  179.              - Allow up to 3 to 4 Weeks for Processing and Delivery -